Summer sale · up to 25% off select batteriesShop Deals →
← Blog & GuidesHow to Read a Battery Spec Sheet (Every Field, Explained)
Tech Explainers

How to Read a Battery Spec Sheet (Every Field, Explained)

September 8, 2026·4 min read·By the CBJJ Team

A field-by-field guide to reading a lithium battery specification sheet: voltage, capacity, current ratings, configuration, cycle life, temperature limits and more.

Battery spec sheets look intimidating — rows of numbers, half of them cryptic. But a well-organized sheet follows a logical structure, and once you see it, you can evaluate any battery in two minutes. Here is every field, grouped the way engineers actually think about them, with what each number should look like on a quality LiFePO4 battery.

Group A: Core Electrical

Nominal Voltage. The battery's "name" voltage, set by its series cell count. For LiFePO4, each cell is 3.2V: 4 cells = 12.8V, 8 cells = 25.6V, 12 cells = 38.4V, 16 cells = 51.2V.

Fully Charged Voltage. The voltage at 100% charge (e.g., 14.6V for a 12.8V pack). This is the number you check against your charger — mismatch here means undercharging or overcharging.

Rated Capacity (Ah). Measured under stated conditions (25°C, 0.5C is standard). Always look for the conditions; capacity varies with temperature and discharge rate.

Energy (Wh). Volts × Ah. The true "size" of the battery — see our dedicated article on [Ah vs Wh].

Continuous Power (W). Voltage × max continuous current. Tells you the biggest load the battery can run.

Group B: The Four Current Ratings

A complete spec gives four numbers:

  1. Standard charge current — recommended everyday charging rate
  2. Standard discharge current — recommended everyday draw
  3. Max continuous current — the hard ceiling, limited by BMS and thermal design
  4. Peak current + time — the momentary surge ceiling, e.g., "500A @ 10s · 1,000A @ 1s"

The last one deserves special attention: a peak current without a time limit is not a spec — it is a guess. Legitimate engineering always pairs the two, because 500A held for 10 seconds and 500A held for 60 seconds are entirely different designs.

Group C: Configuration & Cells

Configuration (e.g., 12S1P). S = series cells (sets voltage), P = parallel strings (sets capacity). 12S1P means twelve cells in series, one string.

Series/Parallel support. Whether finished packs can be connected together, and the limits — e.g., "4P max, no series." This is a hard engineering statement, not a suggestion; follow it exactly.

Cell chemistry. LiFePO4 (LFP) or NMC (ternary lithium) — different safety, lifespan and density profiles. The spec must name it.

Cell source/grade. Top-grade cells (A-grade, named manufacturers) are the biggest hidden quality differentiator in the industry.

Discharge rate (C-rate). 1C = full capacity discharged in one hour. "Continuous 1.5C, 3C for 30s" tells you the pack's muscle in one line.

Internal resistance (mΩ). Lower is better — less heat, less voltage sag under load.

Group D: Charging

Charge voltage. Should equal the fully charged voltage.

CC/CV profile. All lithium charges in two phases: constant current (fast bulk), then constant voltage (gentle taper). Platform charge voltages are standardized: 12V systems charge at ~14.6V, 24V at ~29.2V, 36V at ~43.8V, 48V at ~58.4V.

Recommended charger + charge time. Capacity ÷ charge current × ~1.2 ≈ hours (the CV taper adds time).

Group E: Physical & Interfaces

Dimensions — in both mm and inches. For drop-in replacement buyers, this is the first field checked.

Weight — kg and lbs. Lithium's ~⅓ weight advantage over lead-acid shows up here.

Terminal type — down to the bolt size (e.g., M8×14). Wrong terminal = wrong cable.

Housing & IP rating — ABS/PC shell, metal case; IP65 (splash-proof) or IP67 (brief immersion) for marine/outdoor.

Display / Bluetooth / Communication — touch screen, LED bars, app monitoring, and CAN/RS485 ports for system integration.

Group F: Temperature — Three Separate Lines

Quality specs never lump temperature into one range:

  • Charge temperature (e.g., 0–55°C) — with the hard rule: no charging below 0°C
  • Discharge temperature (e.g., -20–60°C) — wider, with capacity loss at the cold end
  • Storage temperature (e.g., -10–45°C) — for long-term parking

Also look for the low-temperature logic: charge cutoff at 0°C, resume above ~5°C, discharge cutoff around -20°C — and whether the pack has self-heating for cold-climate charging.

Cycle Life — With Its Condition

The lifespan line should read like "4,000+ cycles @ 80% DOD" — a number with its depth-of-discharge condition. A bare "10,000 cycles" with no condition is marketing, not engineering.

The 60-Second Spec Sheet Scan

  1. Voltage + full-charge voltage → matches your system and charger?
  2. Wh (not just Ah) → enough energy?
  3. Continuous + peak current (with time) → covers your biggest load and its surge?
  4. Configuration + series/parallel limits → fits your wiring plan?
  5. Dimensions + terminals → physically fits?
  6. Temperature lines → matches your climate (self-heating if freezing)?
  7. Cycle life @ DOD → honest lifespan claim?

Every CBJJ battery publishes all of the above, field by field. See an example spec sheet

Found a spec you can't decode? Send it to us

Powering a project?

Every CBJJ LiFePO4 battery ships free in the lower 48 — UN38.3 transport paperwork, BMS protection, 1-year warranty.

Related reads